Certifications & Accreditations
Every Premium Safety Apparel product is independently tested and certified by accredited third-party laboratories. Our ISO 9001:2015 quality management system ensures consistent compliance across all production.
Company-Level Certifications
ISO 9001:2015 Quality Management System
Our entire production operation — from design and material procurement to manufacturing, inspection and dispatch — is certified to ISO 9001:2015 by an independent accredited certification body. This means every order is produced under documented quality procedures with full traceability.
OEKO-TEX® Standard 100 Certified Fabrics
The fabrics used in our products are sourced from OEKO-TEX Standard 100 certified mills — meaning they have been tested for harmful substances and are safe for use against skin. This is particularly important for long-wear industrial garments worn over full shifts.
Product-Level Certifications
EN 469:2005+A1:2007
Protective Clothing for Firefighters
Heat and flame protection performance, moisture barrier and steam resistance for structural firefighting garments. Certifies both outer shell and thermal liner performance levels.
EN ISO 11612:2015
Clothing to Protect Against Heat and Flame
Convective heat, radiant heat, contact heat and molten metal splash resistance levels. Certifies performance across multiple hazard types present in heat-intensive industrial environments.
IEC 61482-2:2018
Protective Clothing Against Arc Flash
Arc thermal performance value (ATPV) in cal/cm² using the Box Test method. Provides defined protection categories (APC 1, APC 2) for electrical workers exposed to electric arc hazards.
NFPA 2112:2018
Standard on FR Garments for Flash Fire Protection
Flash fire performance, thermal protection performance (TPP) and fabric heat resistance after laundering. North American benchmark for flash fire protective clothing in oil, gas and chemical industries.
EN 14126:2003
Protective Clothing Against Infective Agents
Resistance to penetration by blood-borne pathogens, bacteria and viruses. Essential for healthcare and pharmaceutical environments where biological hazard exposure is a risk to workers.
EN 388:2016+A1:2018
Protective Gloves Against Mechanical Risks
Abrasion, blade cut, tear and puncture resistance levels for protective gloves. Updated standard includes TDM blade cut test and an optional impact protection assessment for high-risk applications.
Full Standards Compliance Matrix
| Standard | Category | Products Covered | Test Method |
|---|---|---|---|
| EN 469 | Fire Fighting | Fireman Protective Suit (SA-FFG-001) | Flame spread, heat transfer, moisture barrier, steam penetration |
| EN ISO 11612 | Heat & Flame | FR Coverall, FR Jacket, Aluminized Garments range | ISO 15025 (flame spread), ISO 9151 (convective heat), ISO 6942 (radiant heat), EN 702 (contact heat) |
| IEC 61482-2 | Arc Flash | Arc Flash Coverall CAT 2, Arc Flash Suit CAT 4 | IEC 61482-1-2 Box Test; ATPV rating in cal/cm² |
| NFPA 2112 | Flash Fire | FR Coverall (SA-FR-001), FR Jacket range | ASTM F1930 instrumented mannequin test; 3-second flash fire exposure; TPP per ASTM F2703 |
| EN 1149-5 | Antistatic | FR Coverall, Arc Flash garments with antistatic component | EN 1149-1 surface resistivity; EN 1149-3 charge decay test |
| EN 1486 | Proximity Fire | Aluminized Proximity Suit range | Radiant heat reflectance, flame spread resistance |
| EN 14126 | Biological Hazards | Bio-Protective Suit (SA-MED-002) | ISO 16603 resistance to blood; ISO 16604 blood-borne pathogen penetration; EN ISO 22610 wet bacterial penetration |
| EN 374 | Chemical Gloves | Chemical Resistant Gloves range | Penetration resistance, permeation breakthrough time |
| EN 388 | Mechanical Risk Gloves | Cut Resistant Gloves (SA-GLV-001), safety gloves range | Abrasion (Martindale), TDM blade cut, tear, puncture per EN 388:2016 |
| EN 407 | Heat & Fire Gloves | Heat Resistant Gloves, Foundry Gloves range | Flammability, contact heat, convective heat, radiant heat, molten metal splash |
Request Certificate Documents
Certificate documents are provided on request. Contact us with your requirements.